AeroBed Premier Raised Full

The AeroBed Premier Raised is the height of a traditional bed and offers the convenience and portability of the original AeroBed. The powerful recessed pump inflates the AeroBed Premier Raised in under three minutes. The One Touch Comfort Control Wand allows you to adjust mattress firmness to your comfort level. The plush sleep surface adds extra softness and comfort. The bed comes complete with a thick, washable mattress cover and stylish dust ruffle. The AeroBed Premier Raised is the next best thing to giving your guests their own bed.

Full Size (LxWxH) - 74" x 54" x 24" and weighs 40 lbs.

What's included
AeroBed Premier Raised comes with its own exclusive recessed electric pump system, our patented One Touch® Comfort Control Wand, convenient storage bag, stylish dust ruffle and a thick, washable mattress cover. The pump and valve are backed by a two-year limited express warranty. All size Premier Raised beds fit standard size sheets.

Recessed Pump System
The powerful recessed pump features the patented One Touch® Comfort Control Wand, and will inflate the bed in less than 3 minutes. The recessed pump is a UL listed 120-volt pump, 60 Hz, 1.7 Ampere, with a standard U.S. two prong plug and 9ft cord.

Superior Inflation and Deflation

• Bed fully inflates in less than 3 minutes with our exclusive recessed pump system.
• Patented Quick Air Release Valve deflates bed in 45 seconds

Incredible Versatility

• Rolls up and easily stores and transports in its own convenient carry bag.

Top Quality Comfort and Construction

• Over three times the height as the original AeroBed, with a 24" high sleep surface.
• The new One Touch Comfort Control Wand allows for easy inflation and puts adjustment at your fingertips.
• Wider base with pyramid construction, for stability.
• Mattress made of puncture-resistant heavy-gauge PVC vinyl.
• Plush, velvety sleep surface.
• Fits standard size sheets.
• Backed by a two-year limited express warranty on pump and valve.

Frequently Asked Questions

Material
The AeroBed Premier Raised is made of puncture-resistant, 18 gauge, heavy-duty poly-vinyl chloride (PVC). The material is non-allergenic, and is electronically welded at the seams for superior strength and durability.

Cleaning
The AeroBed Premier Raised is made of puncture-resistant, heavy-duty vinyl. It is non-allergenic, non-stainable and cleans up with soap and water or mild household cleaners. Do not use strong chemicals to clean your bed. Allow your AeroBed Premier Raised to air dry completely after cleaning and before storing. The mattress cover is made of a cotton and polyester blend. Machine wash in warm water with mild detergent. Tumble dry on low heat. Do not dry clean.

General Care and Maintenance
1. Inspect your AeroBed Premier Raised prior to each use.
2. Keep your bed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your AeroBed Premier Raised warranty.
3. When not in use, store your bed in a clean, dry place out of extreme temperatures.
4. In case of incidental damage to your bed, a repair kit with instructions is included with each bed. Please follow repair kit instructions carefully.

Important safety information and warnings
It is your responsibility to read and always follow the safety, care and maintenance instructions for your AeroBed Premier Raised. Always instruct and supervise others on the proper use, maintenance and safety of your bed.
IMPORTANT: Preparation of your AeroBed Premier Raised requires no tools. Use of tools may damage your bed.
1. WARNING: Adult supervision required. Follow all safety instructions to avoid serious injury.
2. WARNING: This product has an electrical component that is not a toy. To avoid risk of fire, burns, injury and shock, it should be not played with or placed where small children can reach it.
3. Remove all sharp objects from area where bed will be set up and used.
4. Do not use this product on abrasive surfaces or near pointed/sharp items or surfaces. Protruding objects may puncture mattress.
5. The mattress is made of PVC and therefore may melt or burn if it comes in contact with any flame or heat source. Do not place it near or against heaters, open flame or other hot objects.

Pump details
The AeroBed Premier Raised motor plugs into any 110v outlet. To operate, plug in motor. Make sure the exit valve at the foot of the bed is fully closed. Press and hold the button on the A/C cord. The AeroBed Premier Raised inflates automatically, and is fully inflated in about 3 minutes. You cannot over inflate your AeroBed Premier Raised. Once the AeroBed Premier Raised has been inflated and adjusted for comfort, the pump can be unplugged from the wall outlet.
The pump is a UL listed 110-volt pump, 60 Hz, 1.7 Ampere, with a standard U.S. two prong plug and 9 ft cord.

Problem: Product is leaking air.
Possible reasons and solutions . . .
1. Air is leaking from the Air Release Valve. If air is leaking from Air Release Valve, carefully remove the round black plastic gasket (or white silicone gasket, depending on model) inside the Air Release Valve cover.
Rinse this gasket in warm water for 10 minutes, then cool and towel dry.
Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions.
2. Air is leaking from a puncture or tear in the product.
If you have a puncture or tear in your product, it may be possible to repair the damage by using the Vinyl Repair Kit included with your product. Follow all instructions and heed all warnings included in the repair kit.

Problem: Bed won't inflate.
Possible reasons and solutions . . .
1. The Air Release Valve is open. If the valve is open, close it by using two thumbs to push cover and snap it into valve.
2. The pump is not plugged in. Plug pump into any 110 Volt AC electrical outlet.